Rim seal foam pourer

  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels
  • Access Panels

این تجهیز به صورت تخصصی جهت اطفای حریق مخازن سقف متحرک ساخته شده است.طراحی بخش خروجی تجهیز موجب می شود فوم خروجی از تجهیز با آرایشی منظم به روی دیواره پخش شده و فضای متحرک مخزن (rim seal) را از ماده اطفایی پر نماید.در این تجهیز کمترین هدر رفت فوم اطفایی در نظر گرفته شده است.


Model No. IMF-FP50
Inlet Connection 2inch ANSI#150 RF
Pressure Rating 4bar to 10bar
Nominal Size -
Test Pressure -
Flange Drilling -
  • The Rim Seal Foam Pourer is an air aspirating foam generator connected to the foam pourer to deliver the aspirated foam gently into the tank seal area. The rim seal foam pourer covers a wide range of foam solution rates from 50 to 550 liters per minute at 2.8 to 7 kg/ sq.cm inlet pressure. Each rim seal foam pourer is supplied with an orifice plate, designed for the required flow at inlet pressure. The orifice is field replaceable in the event of change in design parameters. The foam is produced by introducing air into the foam solution stream. The inlet of foam maker is designed to create venturi jet which draws air into the foam solution stream. The air is drawn into the foam solution through holes located on the foam maker covered with stainless steel screen to exclude nesting birds and insects

    • دریافت فایل دیتا شیت